What cleaning pain points of traditional mops can the 360° rotating mop head of this mop solve?

Ordinary mops are difficult to penetrate into the bottom of furniture, narrow gaps or low areas due to the limited angle of the mop head. The 360° rotating structure of this Floor Cleaning Mop allows the mop head to be folded parallel to the rod body at 180°, easily reaching the bottom of furniture as low as 5cm, and the mop surface can fit the ground with the rotation angle, so that full coverage cleaning can be completed without moving the furniture.

Right-angled corners, door frame edges and other areas often have blind spots due to the inability of the mop to fit completely, leaving dust or water stains. The mop head of the Floor Cleaning Mop adopts a ball joint design, which supports multi-dimensional rotation in the horizontal and vertical directions, ensuring that the mop forms surface contact with the corners when cleaning the edges, and cooperates with the locking edge process of the microfiber material to completely remove dust accumulation.

Traditional mops need to bend down frequently to adjust the angle, and are prone to jamming when cleaning complex areas, and long-term use causes muscle fatigue. The combination of bidirectional rotating bearing + universal wheel allows the mop to automatically adapt to the motion trajectory when pushing, pulling, and twisting. With the ergonomic grip, it reduces the need for wrist force by more than 50%.

Ordinary mops are difficult to wring out after absorbing water, and water marks are left on the ground after cleaning, which is especially easy to damage wooden floors. The mop of the Floor Cleaning Mop adopts a double-layer structure of honeycomb guide layer + high-density microfiber, and is equipped with a detachable centrifugal spin-drying bucket (optional), which achieves a dehydration rate of 98%. When rotating and cleaning, trace moisture is evenly released through centrifugal force to achieve a "mop and dry" effect.

When encountering obstacles on the ground or irregular terrain, the tool needs to be replaced. The mop head is equipped with a pressure-sensing spring, which automatically buffers the pressure when crossing the threshold or transitioning between soft and hard ground, keeps the mop continuously attached to the ground, and can replace the scratching mop or ultra-thin fiber cloth at any time through the quick-release structure.